Got iW-GPS-01(with Active Antenna) and iWave's GPS Platforms. The GPS board is mounted on a GPS platform with serial out and has a external antenna. The board has got a serial port and a power input.The board operates on 5 - 35 V input.
Full specification attached here.
Reads I got from Hiper Terminal.
$GPGSA,A,3,14,06,24,03,30,31,21,22,,,,,2.1,1.0,1.8*3D
$GPGSV,3,1,12,31,72,201,17,22,47,056,15,24,38,314,26,14,37,004,24*72
$GPGSV,3,2,12,18,26,093,,30,26,106,24,06,17,219,25,25,16,084,19*73
$GPGSV,3,3,12,19,14,265,,21,13,150,22,03,13,232,27,16,06,191,*7C
$GPRMC,181611.000,A,1257.7947,N,07740.3910,E,0.16,57.21,231010,,,A*54
$GPVTG,57.21,T,,M,0.16,N,0.3,K,A*38
$GPGGA,181612.000,1257.7948,N,07740.3910,E,1,08,1.0,916.6,M,-88.4,M,,0000*75
$GPGSA,A,3,14,06,24,03,30,31,21,22,,,,,2.1,1.0,1.8*3D
$GPRMC,181612.000,A,1257.7948,N,07740.3910,E,0.40,131.00,231010,,,A*69
$GPVTG,131.00,T,,M,0.40,N,0.7,K,A*0D
$GPGGA,181613.000,1257.7946,N,07740.3911,E,1,08,1.0,917.4,M,-88.4,M,,0000*78
$GPGSA,A,3,14,06,24,03,30,31,21,22,,,,,2.1,1.0,1.8*3D
$GPGSV,3,1,12,31,72,201,17,22,47,056,14,24,38,314,26,14,37,004,24*73
$GPGSV,3,2,12,18,26,093,,30,26,106,24,06,17,219,25,25,16,084,19*73
$GPGSV,3,3,12,19,14,265,,21,13,150,22,03,13,232,27,16,06,191,*7C
$GPRMC,181613.000,A,1257.7946,N,07740.3911,E,0.74,149.98,231010,,,A*6E
$GPVTG,149.98,T,,M,0.74,N,1.4,K,A*06
Some pictures of my setup.
Let play around it.
Full specification attached here.
Reads I got from Hiper Terminal.
$GPGSA,A,3,14,06,24,03,30,31,21,22,,,,,2.1,1.0,1.8*3D
$GPGSV,3,1,12,31,72,201,17,22,47,056,15,24,38,314,26,14,37,004,24*72
$GPGSV,3,2,12,18,26,093,,30,26,106,24,06,17,219,25,25,16,084,19*73
$GPGSV,3,3,12,19,14,265,,21,13,150,22,03,13,232,27,16,06,191,*7C
$GPRMC,181611.000,A,1257.7947,N,07740.3910,E,0.16,57.21,231010,,,A*54
$GPVTG,57.21,T,,M,0.16,N,0.3,K,A*38
$GPGGA,181612.000,1257.7948,N,07740.3910,E,1,08,1.0,916.6,M,-88.4,M,,0000*75
$GPGSA,A,3,14,06,24,03,30,31,21,22,,,,,2.1,1.0,1.8*3D
$GPRMC,181612.000,A,1257.7948,N,07740.3910,E,0.40,131.00,231010,,,A*69
$GPVTG,131.00,T,,M,0.40,N,0.7,K,A*0D
$GPGGA,181613.000,1257.7946,N,07740.3911,E,1,08,1.0,917.4,M,-88.4,M,,0000*78
$GPGSA,A,3,14,06,24,03,30,31,21,22,,,,,2.1,1.0,1.8*3D
$GPGSV,3,1,12,31,72,201,17,22,47,056,14,24,38,314,26,14,37,004,24*73
$GPGSV,3,2,12,18,26,093,,30,26,106,24,06,17,219,25,25,16,084,19*73
$GPGSV,3,3,12,19,14,265,,21,13,150,22,03,13,232,27,16,06,191,*7C
$GPRMC,181613.000,A,1257.7946,N,07740.3911,E,0.74,149.98,231010,,,A*6E
$GPVTG,149.98,T,,M,0.74,N,1.4,K,A*06
Some pictures of my setup.
Let play around it.
I want to buy this gps module. Please tell me the way. sumit giri (7696652488)
ReplyDelete@sumit: I suggest do some studies online.. There are different types of boards available with internal and external antenna.. Again If you want a micro controller to write your program, the set up will be different.. I directly connected the module to comp and my program was running from comp.
ReplyDelete